Roborock S50 Australian Model

Smart cleaner gets smarter

Sweeping + mopping | Zoned cleaning | Super cleaning performance | Upgraded sensors

$699.00

All-round upgrade in 4 categories

Cleaner sweeping + mopping performance

Smarter zoned cleaning

Easier obstacle avoidance

More sensitive upgraded sensors

Clean and then mop for a cleaner home

Roborock Robotic Vacuum Cleaner features sweeping + mopping capability for a cleaner experience.

The water tank is designed with the philosophy of botanical biomimetics, and together with the microfiber mopping cloth, they make home cleaning easier.

Botanically biomimetic wet mopping system

Uniform water seepage during moppingNo water seepage when still

The new design of the wet mopping system mimics a tree with the filter as roots and mopping cloth as leaves. They can control the water seepage in an organic manner for wet mopping of 45 to 60 minutes.

Uniform water seepage is achieved during mopping. Water seepage is shut down when the cleaner is still.

* Water is absorbed and transported through the capillarity of the vascular bundles in the roots and the transpiration of the leaves.

When the transpiration of the leaves decreases, the amount of water absorbed is reduced.

* The duration of wet mopping is subject to the floor conditions.

Botanically biomimetic vascular bundle filter

Stable water seepage with impurities filtered

The high-precision botanically biomimetic vascular bundle filter connects the water tanks and the mopping cloth. The filter automatically absorbs water based on the capillary principle to make the cloth keep sufficient water, and filters out the impurities in the water at the same time to prevent water outlet blockage. The modular design enables disassembly and replacement with ease.

Perfect fit

Mopping cloth clinging to the floor well with no hemming

The design with maximum edge attachment is used for where the cloth and the water tank get together, so the cloth is perfectly attached to the water tank, eliminating the hemming phenomenon during mopping which otherwise would affect the normal use due to reduced mopping area.

Peace of mind

Ease-to-install flipping-free water tank

The botanically biomimetic water tank is easily removable in the form of drawer. You can simply insert it to the bottom of the cleaner when mopping without the need to flip over the cleaner.

Laser scanning for map creation Route planning for planned cleaning

Full coverage for complete cleaning High efficiency for faster cleaning Sound planning for orderly cleaning

The high-precision LDS laser range sensor can scan the room at 5×360°/second for distance information, which will then be computed with the industry-leading SLAM algorithm to generate a real-time map. Based on the map, a route along edges first and then in Z-shape will be planned for efficient and complete cleaning.

Customized cleaning area as you wish

Whether you want to clean a single room, all bedrooms or a small area, all you need to do is drag the cleaning frame on the map in the app to set a custom cleaning area.

As flexible and simple as in a game

Tap the map in the app to send a command, and the cleaner will head to the target point and plan a route to avoid obstacles in the front.No map? Just set a target point as you wish and the cleaner will build a map in real time while moving.

Powerful yet compact for great cleaning performance

Long battery life of 5200mAa

Powerful obstacle crossing at 2cm

High suction of 2000Pa

Super suction of 2000Pa to clean everything

  • 0 pa
  • 500 pa
  • 1000 pa
  • 1500 pa
  • 2000 pa
  • Dust
  • Millet
  • Soybean
  • Steel Ball

Vacuum cyclone 3D cleaning system

The powerful high-static pressure fan works like a cyclone for high suction, the floating main brush fits well the floor, and the sealed smooth air duct ensures no suction loss. Along with the side brushes and rolling brushes, they make sure that the floor is completed cleaned, horizontally and vertically.This way, even when you walk on the floor barefoot, you won't feel any dust or granules.

Crossing obstacles of 2cm high with ease

“Nothing can stop my longing for freedom”

* The obstacle-crossing height is subject to floor materials and actual working environment.

* Obstacle-crossing capability may be decreased when the water tank is installed.

Intelligent carpet identification for automatic pressurized cleaning

The cleaner can automatically identify the carpet and turn on the maximum suction to clean it. After getting off the carpet, the cleaner will automatically restore the normal suction.

* Carpet pressurization mode should be enabled in the app

Considerate design for easier cleaning

Washable strainer for easy cleaning

The E11-grade strainer is coated with waterproof Teflon, and 95% filter performance can be retained after 1 year of normal use.

The dustier and dirtier duct bin can be rinsed in water directly, making it easier to clean.

* The normal washing frequency is once a week. Do not scrub it.

Great tangle-free design

Say goodbye to the hairy problem

The main brush, side brush and omni-directional wheels are designed to be tangle-free, preventing hairs from getting into the cleaner and clogging the motor which otherwise may cause motor fault due to heating. A beak-like cleaning tool is included for easy removal of hairs in the cleaner.

Careful noise reduction design
Clean your home more quietly

Fully fitted sealed silencer pads work perfectly with the specially created porous air screen for optimal noise reduction, making cleaning more quiet.

Upgraded sensors for a smarter cleaning experience

Learn more about sensors >

Collision-avoidance soft rubber ring eliminates the damage caused by collision

Cliff sensor protects the cleaner from falling down

The cleaner stops working if lifted off the ground

LDS omni-directional cover bumper sensor prevents the cleaner from being stuck

Dual electronic compasses makes virtual wall detection more precise

Recharge sensor comes with high-precision infrared sensing

From cleaning progress to remote control, everything is crystal clear

Whatever you want to see, it can show you

  • Progress check

    Display cleaning map and route in real time for total visibility

  • Remote control

    Control your cleaner for cleaning, recharging and more even when you are not home

  • Timer cleaning

    Set a timer to make the cleaner work on a regular basis, for example, starting cleaning after you go to work so you can go back to a clean home

  • Software update

    Upgrade the cleaner's software system over the air to keep it up-to-date with latest optimized algorithms

Excellent recharge technology to ensure always standby

New infrared dock charger

Front-transmitted 180° infrared recharge signal can reach far to 4 m, enabling the cleaner to locate the dock charger with high precision backThe dock charger is equipped with impeccable over-current, over-voltage and short-circuit protection, and the low-voltage 20VDC power supply is harmless to both humans and pets.

Automatic recharge and resumption from where left off

More reasonable recharge route planning for even bigger house

The cleaner will automatically return to the dock charger for fast recharge after cleaning. When the battery level is low, the cleaner will recharge and then resume cleaning from where left off.

New recharge method

Intelligent detection for high-precision recharge

When looking for dock charge, the cleaner can intelligently and quickly scan the environment with its LDS laser sensor rather than trace along the walls in the traditional manner, making dock sensing smarter, faster and more reliable.

Robust modular design for excellent durability

Compact, elegant and cutting-edge

Technology, lifestyle, personality and simplicity, this is the design philosophy of the new Roborock Robotic Vacuum Cleaner.

Special thanks to Liang Jianguo, Phillip Stark, Liang Zhitian, Ju Bin of Easyhome for their support with the shooting.

$699.00

Buy Now

All efforts for a better cleaning experience

Botanically biomimetic water tank | High suction of 2000Pa | Streamlined air duct | Floating main brush | Dynamic variable-speed side brush

NIDEC fan

The Nidec brushless motor imported from Japan offers an air flow volume up to 0.67m³/min and a wind pressure up to 2000Pa. The high air flow volume produces a high wind pressure that can suck away the dust on the floor and carpet,achieving an instant cleaning effect.

Streamlined air duct

The aerodynamically streamlined air duct is designed with a horn mouth that forms a high static pressure zone with significantly higher suction, and the air duct inwall uses three-section design on the windward side that guides the air flow smoothly to increase the wind utilization. Meanwhile, the angle of wind approach is enlarged, avoiding the turbulence, lowering the noise and wind resistance and offering a high-static-pressure yet low-noise cleaning experience.

Perfectly sealed air duct

All gaps are perfectly sealed between various connections of parts in the air duct structure. The connection between the dust bin and the air duct is well sealed too to ensure overall air tightness, so the dust is completely sucked into the dust bin with nothing left on the floor at all.The horn-mouth opening is formed by a soft dust collection tube system which is connected to the dust bin using FIP sealing for flexible and great airtightness.

Floating main brush

In home environment, dust is easy to accumulate but hard to clean on tiles, in cracks and around carpet edges. The floating main brush system can float up and down based on the floor conditions and cling to the ground. This way the dust and trash in the cracks can be well sucked out into the dust bin for in-depth cleaning.

Dynamic variable-speed side brush

When sweeping along a wall or an obstacle, the side brush spins at a high speed of 330RPM and thoroughly clears the edge area.

When sweeping in straight line in a Z-shaped path, the side brush spins at a low speed of 130RPM, preventing the trash from flying about.

High-speed mode

Low-speed mode

High suction for complete mopping

Watch the suction test demo

Botanically biomimetic wet mopping system

13 types of sensors for a smarter cleaner

More sensors enable the cleaner to tackle complex working environment with ease in an more intelligent manner

Laser distance sensor

The LDS laser range sensor can scan the room at 5×360°/second for distance information.When the laser light hits an obstacle, a light spot will be formed in the sensor. At the same time, the image sensor will calculate the distance to the center of the sensor based on the pixel number of the spot.

Collision sensor

When the cleaner works, if the enclosure hits an obstacle gently, the enclosure will deform a little bit which will press the two buttons on the outside. The collision sensor works by detecting whether the buttons are pressed and where the collision point is located (left, right or middle) to protect items in the house from being damaged.

LDS omni-directional cover bumper sensor

When the cleaner works, if the enclosure hits an obstacle gently, the enclosure will deform a little bit which will press the two buttons on the outside. The collision sensor works by detecting whether the buttons are pressed and where the collision point is located (left, right or middle) to protect items in the house from being damaged.

Cliff Sensor

4 cliff sensors can sense the height of the step with each one consisting of an infrared transmitter and an infrared receiver. They are installed at the bottom of the cleaner, and the transmitters send out infrared ray to the ground at a specified interval. If the time between transmission and receipt is long or there is no receipt by the receivers, it indicates that the bottom of the cleaner is far away from the ground. This can help prevent the cleaner from falling down.

Wall-detecting laser sensor for more accurate range finding

The cleaner uses STMicroelectronics laser TOF range finding module precise to millimeters. When the cleaner sweeps along wall edges, a distance to the wall of around 10mm is always maintained, and along with the fast-rotating side brush, dust in the wall edges and corners can be well cleaned.Perfect clean-up for every single inch Surface dust-proof for longer servicing time.

Fall sensor
The cleaner stops working as soon as lifted off the ground

The fall sensor can detect whether the wheels are in pressed state so as to determine whether the cleaner is working properly. When the wheels are off ground, the cleaner will stop working immediately, significantly increasing the safety during handling.

Odometer

The odometer works in the same way as on vehicles. It counts the number of wheel rotations and multiply it by the circumference of the wheel to calculate the mileage during working.

Gyro + accelerometer

The tri-axial gyro can detect angular changes in the yaw/pitch/roll directions to determine the orientation of the cleaner, while the tri-axial accelerometer can detect the acceleration of the cleaner in three axes X/Y/Z to determine whether the cleaner tilts or collides with any obstacle.

Dual upgraded electronic compass sensors

Doubled precision for doubled protection.

Dual electronic compass sensors can detected for virtual walls using magnetic field sensing. The cleaner will automatically avoid the area set with virtual walls when it senses the presence of the walls.Virtual walls can be used in places where the cleaner may get stuck such as bathroom to set an isolation area and ensure smooth cleaning.

Dust bin sensor

The strainer supports in-position detection by the Hall magnetic sensor which correctly check whether you forget to install the strainer or the dust bin, avoiding the damage to the fan caused when no strainer or dust bin is present.

Fan speed sensor

The fan speed sensor accurately detects the speed through pulses to record fan speed and determine whether the strainer is clogged.

Recharge sensor

High-precision infrared sensing for accurate dock charger locating

The signal coverage is wide at distance and significantly increases the recharge efficiency. The anti-interference light-filtering and dust-proof cover can be hand-cleaned with ease.

Being smart is not enough To make the home always clean The secret weapon is the sweeping + mopping system Learn more about the design >>

Down to every detail for an ultimate cleaning experience

Washable strainer, fully-sealed dust bin, considerate tangle-free design, storage and cleaning tool included, 180° wide-angle dock charger

Washable strainer

The E11-grade washable strainer is coated with waterproof Teflon, and 95% filter performance can be retained after 1 year of normal use.The dustier and dirtier duct bin can be rinsed in water directly, making it easier to clean.

Full-sealed dust bin

The dust bin is FIP sealed with a large capacity of 480ml for perfect dust retention even after prolonged use in common house environment.The front opening design enables you to empty the dust bin without getting your hands dirty. The large E11-grade washable strainer lets clean air pass while filtering out dirt and impurities.The separate dust bin is equipped with strainer detection to avoid the situation where you forget to install the strainer and eliminate the possible damage to the fan.

Tangle-free omni-directional wheels

The anti-tangling spacer can effectively prevent hairs from entering the gap between the shaft and the wheel.

Beak-like cleaning tool

The beak-like cleaning tool is here to help you tackle the hairy issue. The beak design makes it easy to cut off and clear up the hairs tangled in the main brush.

New infrared dock charger

The entire dock charger is in elegant white with the charging contact piece in the middle. Black infrared light-filtering mask is installed on the front of the cleaner, and there is an infrared transmitter in rear of the mask. The front-transmitted 180° infrared recharge signal can reach far to 4 m, enabling the cleaner to locate the dock charger with high precision back.

Low voltage design to ensure safe use

The dock charger works at a low voltage of 20VD and is equipped with impeccable over-current, over-voltage and short-circuit protection, so no current is output when the cleaner is idle for user safety.

View from different angles Go to the gallery >
x